◇一本大道香蕉中文在线

        1. <th id="4serg"></th>

          Airflow mill was used in the experiment

          Introduction of working principle

          Compressed air is cooled, filtered and dried,a supersonic flow is formed through the nozzle and injected into the crushing chamber,The accelerated materials meet at the junction of the jet flow of several nozzles, resulting in severe impact friction shear and particle ultrafine crushing.After crushing, the material is transported to the impeller classifying zone by the upwelling air flow, and the separation of coarse and fine powder can be realized under the action of centrifugal force of the classifying wheel and the suction force of the fan,separation of coarse powder and fine powder,The coarse powder returns to the crushing chamber according to its own gravity and continues to crush then the qualified fine powder enters the cyclone collector with the airflow. The fine dust is collected by the bag dust collector and the purified gas is discharged by the fan.

          Introduction of Technical Parameters

          Model LHL-1
          Feeding particle size         ≤1mm
          Grinding fineness 3~100um
          Gas consumption 1~1.5m3/min
          Air pressure 0.8~1MPa
          Motor power Classifier 0.75KW
          Draught fan 2.2KW
          Feedstock 0.37KW
          Air compressu 7.5~11KW
          Capacity 1~30kg/h
          Previous: Nothing Next: Fluidized bed jet mill
          Global Contact
          Tel:0086-536-3163838
          Email:cnguote@163.com
          Address:East of Dongjing Road, Qingzhou,Weifang City, Shandong Province, P.R.CHINA_262500
          China Contact
          TEL:0086-536-3685656
          Email:cnguote@163.com
          Address:East of Dongjing Road, Qingzhou,Weifang City, Shandong Province, P.R.CHINA_262500
          ◇一本大道香蕉中文在线

                1. <th id="4serg"></th>